How much water is used in your home each month? Consider how often the shower, faucet, clothes washer, or dishwasher runs, and don't forget about each toilet flush. Many are unaware that approximately 90% of all indoor water ends up down a drain. Homeowners place thousands of gallons of water, and much of their hard-earned money right down a drain every month too. Installing water conservation products is a simple, cost-effective way to reduce both water consumption and costs at home.

Saving water in the shower also saves energy

A 10 minute shower (most teenagers typically spend more) in a home with a non-water saving showerhead consume between 30-50 gallons of water per shower. A 1.5 GPM low flow shower head would use only 15. Keep in mind that the majority of showers are taken with hot water. Limiting the amount of water flowing from the shower also limits the amount of energy used by the water heater. A low flow showerhead decreases not only the water bill, but the water heating portion of the energy bill as well.

Timing showers is the next step in realizing the amount of water and energy savings possible in the shower. A shower timer is placed right on the wall to do just this task. It times the showers in 5 minute intervals. Once you know how many gallons of water are being used per minute, and how many minutes are spent in the shower, you can then calculate the amount of water used per shower. Taking shorter showers and using less water can save over 50,000 gallons of water every year.

Saving at the tap

The average faucet in the bathroom and kitchen use almost as much water as the showerheads in the home. While thoroughly washing hands and vegetables is important, the amount of water pressure in a shower is not necessary for such tasks. The average family of four using the faucet for 30 minutes a day easily consumes about 2,000 gallons of water through this source every month. Water conservation products, such as low flow faucet aerators, reduce this amount by almost 50%.

Flushing money down the toilet

The largest source of indoor water consumption in a home is the toilet. Water conservation products, such as a toilet tank banks, are designed to limit the amount of water that is wasted here. A toilet tank bank is a displacement bag that reduces the amount of water used per flush by 0.8 gallon. By installing this, a family of four can save roughly 8,180 gallons of water from being flushed down a toilet every year.

A huge way in which toilets waste water is through leaks. Toilet leaks are often silent and waste 3,000 to 5,000 gallons of water every day that they are left unnoticed. In addition to wasting water, leaks waste money, increasing the water bill by as much as $100 every month. Toilet leak detection tablets are the most cost-effective water conservation products used to discover this problem. Simply drop the tablets in the toilet bowl, wait approximately 20 minutes, and check for blue color, which will indicate a leak.

There are a number of benefits to using water conservation products. They help reduce the amount of money spent on both water and energy bills. In addition, water saving measures ease the burden on local water supply, reducing the amount of energy required to treat and deliver the water that comes to your home. Water conservation products are both cost-effective, and simple ways to solve the problem of every day water waste at home.