There are many types of boilers, with different installation needs. Boiler installation is not an easy task, and it cannot be done by everybody – it requires a professional gas engineer to perform this job according to all gas safety regulations. Safety is something that should always be kept in mind while installing a boiler.

This is also experience that allows an engineer to perform his job quickly and he shouldn’t be surprised in case anything happens.

The piping and venting systems of any boiler installation are essentially the same, but the type of gas, the regulator, etc. might change as you move from gas fired boilers to combination boilers and others like hydronics. You should also remember to check your local laws whether you need any special permission to install a new boiler as many states require a permit to do so.

The initial preparation for the installation requires water, gas and electrical lines near the place where you want to have your boiler installed. You will then need to add all the special accessories to your boiler. This includes supplements like circulatory pumps, valves, screws, flow checks, etc. One should make sure, for example, that there are enough circulators on your system. If not, there is bound to be constant boiler failure over the years, which is not certainly what you would like. The proper size of piping and zones is essential to ensure the smooth running of your boiler system.

Another important issue is ventilation. It is imperative for the boiler to be vented properly in order to ensure its safe and efficient performance. The type of venting greatly varies with the type of boiler. This should be kept in mind and you should see the venting instructions and procedures for your type of boiler in the installation manual.

Of course not only venting instructions are worth your attention. As it is with all kinds of modern appliances, the manual should be read carefully from A to Z. Many people usually do not bother to go through all the pages to learn something about their new devices. If they did it, it is quite possible they could spare some money, time and nerves in the future in case of any appliance malfunction. Some of the problems may be solved using the instruction manual and following its hints only. And after all – time is money – remember that.