Pressure cleaning windows is one of the most important and delicate tasks when it comes to house maintenance. Clean windows always add a pleasing look to both the exterior and interior of the house. While dealing with windows made up of glass and other such delicate materials, care should be taken to clean them without damaging them. Here are some tips for pressure cleaning windows to get the best results from your pressure washer.

Take some necessary precautions before the task: Some aspects have to be considered before you jump start the task of pressure cleaning the windows. Remove the curtains and the potted plants placed on the window sill. Check the windows for any cracks or holes and seal them to prevent the leakage of water through the cracks into the house. Make sure that no live wires or electrical wires are present in the vicinity of the area to be washed. You can also place some towels on the window sill present on the interior side of the house to avoid seepage of water.

Choose suitable chemicals: Decide the appropriate chemicals and the suitable methods to be employed for pressure cleaning windows. The type of material of which the window and its frame are made should be taken into account while selecting the chemicals for the task of cleaning. It should also take the intensity of dust or debris or at times, growth of mosses into consideration. Care should be taken that the chemicals used should suit the pressure cleaners.

Pressure cleaner’s adjustments: It is good to operate the pressure cleaners at low power while cleaning the windows and its exteriors. The optimum angle at which the hose can be held is around 45 degrees. Do not target the stream of gushing water onto the area to be cleaned for a much longer time. In most of the cases, it is advisable to make use of cold pressure washers and to avoid high pressure cleaners and hot pressure cleaners. This is because most of the windows are made up of glasses which are prone to break under high pressure.

Effective methods for good results: Spray the chemicals from bottom to top in a horizontal fashion and allow it to stay on for sometime. Rinse the area with cold pressure washers from top to bottom to get good results. This ensures that the entire is treated evenly with chemicals and rinsed thoroughly with water. This technique applies well for windows made up of a single glass. But in the case of tiled window panes, the technique of removing the glass panes and treating them and fixing them back in their position simplifies the task.

So, the next time you plan to give a new look to your windows at the dawn of the spring, just bear these simple pressure cleaning tips for window cleaning to get good and effective results in a short period of time and bring back the beauty and shine to the windows and in turn, amplify the beauty of the exterior of your house.