Whether the cleaning needed is for a home or office, there are several steps that should be taken before cleaning carpets. This will ensure that the option chosen is the best one for the carpet and furniture. The results obtained by a professional will allow carpet and furniture to be in better shape after the cleaning.

What are the Basic Steps used by Carpet Cleaning Professionals?

One of the first steps in cleaning carpets is the pre-inspection. This allows the best method to be chosen for cleaning. After the pre-inspection, the carpet or furniture should be dye-tested to prevent damage during cleaning. This involves testing an area of the carpet or furniture that is not obviously seen to make certain the dye is stable. A small amount of cleaner is applied and a towel is pressed against the area.

A pre-vacuum using a commercial-grade vacuum cleaner should be next to remove all the dirt from the carpet. This is very important as it allows the products being used to access any stains in the carpet directly.

One of the most dreaded jobs when cleaning carpets is moving the furniture. A professional carpet cleaning crew will move the furniture and they will even place blocks or tabs to protect the furniture from moisture while the carpet is being cleaned.

Following these steps is crucial to cleaning carpet to the best standards available. This is where many do-it-yourself carpet cleaners fall short. As the equipment that is available to carpet cleaning professionals is commercial-grade rather than the typical type that is available to consumers, the results are far superior.

The professional will pre-treat areas that are heavily soiled prior to cleaning the carpet. This will help loosen stains and dirt that are particularly resistant. The equipment then pulls the dirt and stains from the carpet using electrical charges. This is followed by post cleaning if there are any spots remaining in the carpet. The post cleaning will remove these stains.

The carpet should be completely dry within an hour or two. Dry bonnets are used to reduce the time it takes for the carpet to cry and allows the professional to make certain the cleaning meets their standards. The next step is to set the pile on the carpet so that it looks as good as new. This technique uses a special type of upholstery brush.

After this is completed, a walk through with the professional to ensure that you are happy with the results is part of the post inspection process. The blocks or tabs that were placed under the furniture should be left for 24 hours after the carpet has been cleaned.

A good follow-up includes having carpets treated with a carpet protector. This will help to make the next cleaning easier. Carpet protector helps to repel dirt and stains and reduces the wear and tear on high traffic areas. The life of your carpet can be increased dramatically by using a good protecting product and having carpet professionally cleaned.